Polyurea/Polyurethane Waterproofing Foaming Spray Machine

short description:

  • Power source: 3-phase 4-wires 220V 50Hz
  • Working power: 18KW
  • Driven mode: hydraulic
  • Air source: 0.5~0.8 MPa ≥0.5m³/min
  • Raw output: 3~10kg/min
  • Maximum output pressure: 24Mpa
  • AB material output ratio: 1:1
  • Product Detail


    Product Tags


    1.Equipped with air cooling system to reduced oil temperature, hence offering protection for the motor and pump and save oil.

    2.Hydraulic station works with booster pump, guaranteeing pressure stability for A and B material

    3. The main frame is made from welded seamless steel tube with plastic-spray so it is more corrosion resistant and can bear with higher pressure.

    4. Equipped with emergency switch system, help operator deal with emergencies rapidly;

    5. Reliable & powerful 220V heating system enables rapid warming of raw materials to the best state, making sure it performs well in cold condition;

    6. Humanized design with equipment operation panel, super easy to get the hang of it;

    7.Feeding pump adopts big change ratio method, it can easily feed raw materials high viscosity even in winter.

    8.The latest spraying gun has great features like small volume, light weight, low failure rate, etc;


    Iteam/TDS JYYJ-H600
    Raw material polyurea    polyurethane
    Features 1.can be used both for spraying
    and casting with higher production efficiency  2.Hydraulic driven is more stable
    3.  both polyurethane and polyurea can be used
    POWER SOURCE 3-phase 4-wires 380V 50HZ
    AIR SOURCE (min) 0.5~0.8Mpa≥0.5m3
    OUTPUT(kg/min) 2~12
    Matrial A:B= 1;1
    spray gun:(set) 1
    Feeding pump: 2
    Barrel connector: 2 sets heating
    Heating pipe:(m)  15-120
    Spray gun connector:(m) 2
    Accessories box: 1
    Instruction book 1
    weight:(kg) 340
    packaging: wooden box
    package size(mm) 850*1000*1400
    Digital counting system
    Feed amount adjusted, time-set & quantity-set
    Double cyclinder supercharged unit
    Hydraulic driven
    pneumatic driven


    This equipment is can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc.

    pipe-coating polyurea-coating wall-coating car-coating

  • Previous:
  • Next:

  • 1.Are you factory or trading company?

    We are professional factory in PU industry with more than 10 years experience, covering high pressure pouring machine,low pressure foaming machine, pu spraying foam machine,pu elastomer casting machine and production line for flexible foam products like PU shoe /sole/insole,anti-fatigue mat, memory pillow, elastic stress ball, car seat and cushion,pu slow rebound ear plugs; also rigid foam products production line: PU decorative molding crown cornice line, float trowel making line, cold storage panel production line, sandwich panel production line, last not the least, elastomer product: forklift wheel casting line, coal sieve screen select line and so on.

    2.Where is your factory ?

    Our Factory is located in Wuxi city, Jiangsu Province.

    3.How can i get your factory?

    By air: You can take a plan to WUXI airport from China, if you fly from Korea ,Japan, USA, Singapore, Taiwan, Thailand you will can directly fly to us.

    By Train: You can stop at WUXI station, Not WUXI EAST station.

    4.Do you provide pick-up service?

    Yes, of course. If you are in Wuxi airport or station, we can arrange a special car to pick you up directly to our factory.

    5.What is the PU raw material used with this polyurethane/polyurea foam casting machine?

    Polyurethane which has two components polyol and isocyanate(poly and iso/mdi). Polyurea also can be used which helps to waterproofing and Anticorrosion and rust prevention. Polyurethane can be divided into two kinds, flexible foam and rigid foam. And flexible foam or rigid foam also has two kinds, open cell foam and closed cell foam.

    6.If I need to develop a special PU raw material formula solution based on my product, can you provide it?

    Yes, we can. We have technical team of chemical engineers and process engineers, all of whom have more than 20 years of experience in PU industry. We can independently develop raw material soluation like polyurethane rigid foam, polyurethane flexible foam, polyurethane integral skin foam and polyurea to meet customer’ s requirements.

    7.What is the application of PU foam machine?

    PU spray foaming machine has two functions:
    Spraying: building exterior wall coating, interior wall coating, roof spray, cold spray, cold storage spray, cabin coating, tank body coating, industrial anti corrosion, etc.
    Casting: solar water heater, insulation water tank, cabin, roller shutter door, security door, refrigerator, pipe joints, product packaging, highway construction, wall sound insulation, etc.

    PU polyurethane foam injeciton machine can make pu rigid foam products like pu crown molding, pu bed sets, pu plastering float, pu coldroom panel; pu flexible foam products like car seat cushion and car headsets, memory foam pillow, slow rebound ear plugs, pu stress ball and kids toy; pu elastomer products like forklift wheel, rollers, sieve screen and so on.

    You need to tell us specific machine application and budget, to spray or cast, then we can recommend suitable machine for you.

    8.How long is your polyurethane foam casting machine warranty?

    1 year. Within one yea, if it is not man-made damage, we will provide free replacement parts, but the shipping cost needs to be paied by the customer.

    9.How to solve the polyurethane foaming machine failure?

    For pu spraying machine: If there are quality problems with accessories during the one-year warranty period, we can provide replacement parts for free. If there are operations or other problems, you can send photos or videos to us, we will consult our engineers to help you solve the problem.

    For high/low pressure foam dispensing machine, elastomer casting machine and other production line: our machine all have remote maintenance and diagnosis function. You can also send us pictures or videos, our engineers can help to solve the problems via pictures and videos.

    10.What if I don’t install it after I get the polyurethane pouring machine? Do you offer installation services?

    Yes, we supply video technical support. If your company has engineer, you can come to our factory, we will provide field installation, commissioning and training. Of course, our engineers are available to service machinery overseas.

    11.What is your packaging of your PU foam injection machine?

    The normal package is wooden box (Size: L*W*H). If export to European countries, the wooden box will be fumigated. If container is too tighter, we will use PE film for packing or pack it according to customers special request.

    12.What transport methods do you have for your polyurethane foam making machine?

    For polyurethane foam spray machine, sea and air transportation are both available. For high/low pressure foam machine and other bigger machine, only sea transportation is accepted. But for little accessories of the machine like spray gun and mixing head, express is also ok.

    13.Can I be your agent in our own country?

    We already have some agents of pu spray machine, high/low pressure foam injection machine, pu elastomer casting machine around word like Pakistan, Iran, Malaysia, Algeria and so on, if you are interested, you can send your intentions with your company’s information and personal contact details, then we will email you our requirements to check if we can cooperate.

    14.How can I buy your pu foam machine and pay for the money?

  • Write your message here and send it to us